Custom Resolution Utility (CRU)

[bobalazs]

Toasty, can you please do anything about my request?

[ToastyX]

(01-12-2022 08:31 AM)bobalazs Wrote:  I thought i could. that's great.
I can't find exactly what i need to change/remove though. I don't want to mess it up. If I upload the file, can you help me with that please? https://www.mediafire.com/file/uoeknaeix...t.bin/file
I'd like to used a 1920x1080 resolution in RGB, instead of YCbCr.
Also does this option require that i have a driver installed? I mean i have to change this info everytime i change drivers? (when amd driver is used as a "minimal install", there is no setting to change the YCbCr to RGB, and that ugly ycbcr is used.)

If you don't uninstall the driver before upgrading, then it will keep the current settings. If you do a clean install or use DDU, then you will have to import the changes again.


  UMC0030.bin (Size: 256 bytes / Downloads: 342)

[notJeff]

(01-12-2022 04:30 PM)ToastyX Wrote:  

(01-12-2022 04:04 PM)notJeff Wrote:  Hello, I've been using cru for a while without problems. But today when trying a new resolution for my 2nd monitor and clicking "ok" a pop-up shows and says something like "some settings didn't save" or it was something like that, I forget. Rebooted pc, all 2 monitors are active and fine. So I open CRU and it didn't detect my 2nd monitor only shows my first monitor. The 2nd monitor is active and I can change resolution and stuff. So then I try reset-all.exe but CRU still didn't detect my 2nd monitor.

Any ideas on how to fix this?

There must be something in the registry that CRU couldn't process. Use RegEdit to export HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\DISPLAY to a .reg file and upload it here so I can see if there's anything unusual.

hope this is what you mean by export (the AUO61ED is my laptop display that is my first monitor im pretty sure, idk about the CGC...) https://www.mediafire.com/file/71jpptig2...y.reg/file

[ToastyX]

(01-12-2022 04:51 PM)notJeff Wrote:  hope this is what you mean by export (the AUO61ED is my laptop display that is my first monitor im pretty sure, idk about the CGC...) https://www.mediafire.com/file/71jpptig2...y.reg/file

If the monitor is CGC0000, then it's missing the driver information. Try uninstalling the monitor in Device Manager and reboot.

[notJeff]

(01-12-2022 05:18 PM)ToastyX Wrote:  

(01-12-2022 04:51 PM)notJeff Wrote:  hope this is what you mean by export (the AUO61ED is my laptop display that is my first monitor im pretty sure, idk about the CGC...) https://www.mediafire.com/file/71jpptig2...y.reg/file

If the monitor is CGC0000, then it's missing the driver information. Try uninstalling the monitor in Device Manager and reboot.

umm.... device manager didn't detect it either

[ToastyX]

(01-12-2022 05:20 PM)notJeff Wrote:  umm.... device manager didn't detect it either

In Device Manager, open the View Menu and enable "Show hidden devices." Then uninstall every monitor and reboot.

[notJeff]

(01-12-2022 05:31 PM)ToastyX Wrote:  

(01-12-2022 05:20 PM)notJeff Wrote:  umm.... device manager didn't detect it either

In Device Manager, open the View Menu and enable "Show hidden devices." Then uninstall every monitor and reboot.

"Show hidden devices" still didnt show. Only shows laptop monitor.

[ToastyX]

(01-12-2022 05:43 PM)notJeff Wrote:  "Show hidden devices" still didnt show. Only shows laptop monitor.

What is the model of the laptop and monitor? What does Windows call the monitor in the display settings? Are the correct resolutions available for the monitor? Are you using VGA, DVI, HDMI, or DisplayPort?

[notJeff]

(01-12-2022 05:58 PM)ToastyX Wrote:  

(01-12-2022 05:43 PM)notJeff Wrote:  "Show hidden devices" still didnt show. Only shows laptop monitor.

What is the model of the laptop and monitor? What does Windows call the monitor in the display settings? Are the correct resolutions available for the monitor? Are you using VGA, DVI, HDMI, or DisplayPort?

Ok, I think I fixed it. basically, I copied HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\DISPLAY\CGC0000 reg file from my 2nd windows (since I'm dual booting) and applied it to main windows (the one that didn't detect) And CRU is detecting the 2nd monitor now. Thx for the help ToastyX!!

[OpticzX]

Hello. I feel like this may be a outdated PC kinda thing but, whenever I use the CRU and run it, nothing changes.

PC Specs
Lenovo ThinkPad T530
Windows 10 Pro (21H2)
CPU - Intel Core i5-3230M (2.60Ghz)
GPU(s) - Nvidia NVS 5400M/Intel HD Graphics 4000
Storage - PNY SSD 1TB
Monitor - LCD 1366x768