AMD/ATI Pixel Clock Patcher
|
12-16-2023, 09:58 PM
Post: #1241
|
|||
|
|||
RE: AMD/ATI Pixel Clock Patcher
(12-13-2023 07:50 PM)maxine64 Wrote: I see, is there any way to circumvent this in any shape or form?HDMI requires at least 25 MHz, but you can increase the blanking/totals to increase the pixel clock. Low resolutions should be available in any program that lists resolutions, such as HotKey Resolution Changer: https://funk.eu/hrc/ |
|||
12-18-2023, 02:43 PM
Post: #1242
|
|||
|
|||
RE: AMD/ATI Pixel Clock Patcher
(12-16-2023 09:58 PM)ToastyX Wrote:(12-13-2023 07:50 PM)maxine64 Wrote: I see, is there any way to circumvent this in any shape or form?HDMI requires at least 25 MHz, but you can increase the blanking/totals to increase the pixel clock. Low resolutions should be available in any program that lists resolutions, such as HotKey Resolution Changer: https://funk.eu/hrc/ problem is that my CRT TV won't take those timings, but I did do that in my CRT monitor and I just adjusted the geometry. |
|||
12-21-2023, 08:33 PM
Post: #1243
|
|||
|
|||
RE: AMD/ATI Pixel Clock Patcher
(12-11-2023 04:06 AM)ToastyX Wrote:(12-06-2023 03:45 PM)JC2699 Wrote: https://pixeldrain.com/u/YHgTxXfg after updating to AMD-Software-Hybrid-Edition-23.12.1-PVNFlex-Nebula-Native-DCH (Amernime drivers), latest atikmdag-patcher doesnt work anymore, i need to patch the driver because im using a modified bios (OC purpose) on my RX 550 4gb23.12.1 has significant changes, so I would have to find all the limits again. Stick with the official 23.11.1 for now. you will update the software? |
|||
12-24-2023, 10:11 PM
Post: #1244
|
|||
|
|||
RE: AMD/ATI Pixel Clock Patcher
(12-21-2023 08:33 PM)davidmza Wrote: you will update the software?Yes, but it still works with the latest official Polaris/Vega driver, 23.11.1. I need to see if the next version for Polaris/Vega has the same changes as the RX-series driver, or if only the RX-series drivers are different. The Amernime/R.ID driver is forcing the RX-series driver to be used with Polaris/Vega GPUs, and that driver is also found differently. |
|||
01-15-2024, 12:16 PM
Post: #1245
|
|||
|
|||
RE: AMD/ATI Pixel Clock Patcher
Hello ToastyX.
I have a question for you. Since you know where the Bios signature check is located, perhaps you have looked at how this check is done? The point is, why hasn't anyone made a Bios tweaker with support for calculating the signature and writing the necessary values to the Bios? Then there would be no need to bypass the signature check in the driver. And when releasing a new version of the driver, where the subroutine for checking is located elsewhere, it would not be a problem. |
|||
01-15-2024, 10:35 PM
Post: #1246
|
|||
|
|||
RE: AMD/ATI Pixel Clock Patcher
(01-15-2024 12:16 PM)Supos Wrote: Hello ToastyX.I don't know much about how it works. The signature probably uses cryptography, so you'd need the proper key to sign it. |
|||
02-01-2024, 09:54 PM
Post: #1247
|
|||
|
|||
RE: AMD/ATI Pixel Clock Patcher
(12-24-2023 10:11 PM)ToastyX Wrote:(12-21-2023 08:33 PM)davidmza Wrote: you will update the software?Yes, but it still works with the latest official Polaris/Vega driver, 23.11.1. I need to see if the next version for Polaris/Vega has the same changes as the RX-series driver, or if only the RX-series drivers are different. The Amernime/R.ID driver is forcing the RX-series driver to be used with Polaris/Vega GPUs, and that driver is also found differently. Did you review the changes in version 24.1.1 in polaris? to be able to update the patch.. thanks |
|||
02-03-2024, 02:13 PM
Post: #1248
|
|||
|
|||
RE: AMD/ATI Pixel Clock Patcher | |||
02-11-2024, 09:39 AM
Post: #1249
|
|||
|
|||
RE: AMD/ATI Pixel Clock Patcher
Okay, so no dice on any new drivers from Radeon-ID R.ID NimeZ drivers, including 24.1.1? It works fine on official 24.1.1, just not NimeZ. Why? Thanks
|
|||
02-14-2024, 03:22 AM
Post: #1250
|
|||
|
|||
RE: AMD/ATI Pixel Clock Patcher
(02-11-2024 09:39 AM)chris89 Wrote: Okay, so no dice on any new drivers from Radeon-ID R.ID NimeZ drivers, including 24.1.1? It works fine on official 24.1.1, just not NimeZ. Why? ThanksThe R.ID installer is using the RX 5000/6000/7000-series driver instead of the Polaris/Vega driver. That driver is different, so I have to go through and find all the limits again. |
|||
« Next Oldest | Next Newest »
|
User(s) browsing this thread: 2 Guest(s)