Custom Resolution Utility (CRU)

[emusnoc]

I'm trying to remove the TV resolutions on the GM001J, but the extension blocks are gray and can't be edited. Is there a work around for this?

[guest1]

downloaded the zip file instead of the exe, these three exe's bring up the old intel hd graphics control panel, where i'm able to set my custom resolutions

[AgitossUa]

Hi.
Need a little help with new monitor please.
Samsung Odyssey g70b/hdmi 2.1 connection. If adaptive sync on - sometimes on switching full screen to borderless have black screen. Audio - working. Just full lost of video signal.
Cure - disable adaptive sync in monitor setting, thats restart monitor and image start showing up.
As i understand after google - need to corect v rate.
But in my scenary - v rate blank.

Extension blocks - empty.
If i understand correctly - i need to add "cta-861" block and use "freesync range" option with what numbers? Something like "60-144?"
Or i need "hdmi 2.x support" and "Variable refresh rate" range option ?

[ToastyX]

(12-19-2023 11:30 AM)AgitossUa Wrote:  Need a little help with new monitor please.
Samsung Odyssey g70b/hdmi 2.1 connection. If adaptive sync on - sometimes on switching full screen to borderless have black screen. Audio - working. Just full lost of video signal.
Cure - disable adaptive sync in monitor setting, thats restart monitor and image start showing up.
As i understand after google - need to corect v rate.
But in my scenary - v rate blank.
https://i.imgur.com/bNunR78.png
Extension blocks - empty.
If i understand correctly - i need to add "cta-861" block and use "freesync range" option with what numbers? Something like "60-144?"
Or i need "hdmi 2.x support" and "Variable refresh rate" range option ?

Are the extension blocks empty or do they say default extension block? If default, is this with an NVIDIA GPU? NVIDIA's driver ignores EDID overrides for displays that have the extension block problem, so you won't be able to make any changes until they fix this. Frankly you shouldn't need to use CRU to fix a problem with a new monitor. This sounds like a firmware bug with VRR that Samsung needs to fix, so you should report this issue to their support, or return it and get a different monitor without this problem.

[ToastyX]

(12-18-2023 03:54 PM)emusnoc Wrote:  I'm trying to remove the TV resolutions on the GM001J, but the extension blocks are gray and can't be edited. Is there a work around for this?

There are ways to read the extension blocks, but NVIDIA's driver ignores EDID overrides for displays that have this problem, so they need to fix this first.

[AgitossUa]

(12-20-2023 01:38 AM)ToastyX Wrote:  

(12-19-2023 11:30 AM)AgitossUa Wrote:  Need a little help with new monitor please.
Samsung Odyssey g70b/hdmi 2.1 connection. If adaptive sync on - sometimes on switching full screen to borderless have black screen. Audio - working. Just full lost of video signal.
Cure - disable adaptive sync in monitor setting, thats restart monitor and image start showing up.
As i understand after google - need to corect v rate.
But in my scenary - v rate blank.
https://i.imgur.com/bNunR78.png
Extension blocks - empty.
If i understand correctly - i need to add "cta-861" block and use "freesync range" option with what numbers? Something like "60-144?"
Or i need "hdmi 2.x support" and "Variable refresh rate" range option ?

Are the extension blocks empty or do they say default extension block? If default, is this with an NVIDIA GPU? NVIDIA's driver ignores EDID overrides for displays that have the extension block problem, so you won't be able to make any changes until they fix this. Frankly you shouldn't need to use CRU to fix a problem with a new monitor. This sounds like a firmware bug with VRR that Samsung needs to fix, so you should report this issue to their support, or return it and get a different monitor without this problem.

Understand - thank you. 3080ti. Yes - default extension block.
Definitely it's firmware - odyssey not good with quality control so i knew something gonna happen. Got one before.
But leave it for now - if use borderless as main settings, no problem at all.
Anyway i buy it for year~ - waiting for new oled on start of next year.

[emusnoc]

(12-20-2023 01:39 AM)ToastyX Wrote:  

(12-18-2023 03:54 PM)emusnoc Wrote:  I'm trying to remove the TV resolutions on the GM001J, but the extension blocks are gray and can't be edited. Is there a work around for this?

There are ways to read the extension blocks, but NVIDIA's driver ignores EDID overrides for displays that have this problem, so they need to fix this first.

Darn, well, thanks for the info.

[caziban]

I have an HDMI headless dongle that I'm trying to set to 4k 120hz. I have a 4090, so it has an HDMI 2.1 port on it. Is there any way to do this without TV resolutions?

[chop]

(12-08-2023 04:59 AM)ToastyX Wrote:  

(12-06-2023 05:40 AM)chop Wrote:  I need some assistance trying to use cru. I have the hz benq zowie xl2566k and I cant use the 360 hz and when I try to change my resolution through "List all modes" black bars just appear when I press "okay"

What are you trying to use CRU for? What GPU do you have and how is the monitor connected?

Im trying to use cru for display scaling for games. I'm using a 4080 and the monitor is connected through a display port.

[ToastyX]

(12-23-2023 06:46 AM)chop Wrote:  Im trying to use cru for display scaling for games. I'm using a 4080 and the monitor is connected through a display port.

You say you can't use 360 Hz. What are you doing and what happens? For black bars, display scaling is controlled by the monitor, so check your monitor's settings to control the scaling.