Custom Resolution Utility (CRU)

[chrisssj2]

In windows settings > Display> Advanced display my G9 neo 57 inch reads as 1500 nits and i have used windows hdr calibration tool.

Now nvidia's RTX HDR reads for me at 1015 nits for some reason. (other people have reported different values for them)
I used CRU luminance to change from 139 to 157 which should be 1000 to 1500 nits. Hopefully this is correct what i did?

At any rate RTX HDR still reads as 1015 for some reason any idea?

Also what does max frame -avg do?

[joaoribeiro92]

I’m trying to use CRU to create a stretch res but on the standard resolution I can’t find my native resolution that is 2560x1440p I try to add it but the numbers appear in red so I can’t press ok to add it any help whit this ?

[someone]

(02-24-2024 01:28 PM)joaoribeiro92 Wrote:  I’m trying to use CRU to create a stretch res but on the standard resolution I can’t find my native resolution that is 2560x1440p I try to add it but the numbers appear in red so I can’t press ok to add it any help whit this ?

the horizontal resolution is limited to 2288; add a detailed resolution.

[joaoribeiro92]

(02-24-2024 06:33 PM)someone Wrote:  

(02-24-2024 01:28 PM)joaoribeiro92 Wrote:  I’m trying to use CRU to create a stretch res but on the standard resolution I can’t find my native resolution that is 2560x1440p I try to add it but the numbers appear in red so I can’t press ok to add it any help whit this ?

the horizontal resolution is limited to 2288; add a detailed resolution.

So it means that I can’t use CRU on 2560x1440 ?

[CRTFTW]

Founds some weird driver behavior on my 6800 XT and 4k 120hz monitor.

If I add 2160p 100hz via the "TV resolutions" data block, Virtual Super Resolution (downsampling) will be disabled in Adrenalin.

But if I add a 2160p 100hz mode in detail resolutions, everything works normally.

I imagine most of you just use detailed resolutions anyway, but I thought I'd throw it out there in case in anybody runs into the issue

[someone]

(02-24-2024 06:45 PM)joaoribeiro92 Wrote:  

(02-24-2024 06:33 PM)someone Wrote:  

(02-24-2024 01:28 PM)joaoribeiro92 Wrote:  I’m trying to use CRU to create a stretch res but on the standard resolution I can’t find my native resolution that is 2560x1440p I try to add it but the numbers appear in red so I can’t press ok to add it any help whit this ?

the horizontal resolution is limited to 2288; add a detailed resolution.

So it means that I can’t use CRU on 2560x1440 ?

Yes you can, but you need to add it as a detailed resolution like I said; the maximum possible resolution is 4095x4095 in that case.

[joaoribeiro92]

(02-24-2024 09:51 PM)someone Wrote:  

(02-24-2024 06:45 PM)joaoribeiro92 Wrote:  

(02-24-2024 06:33 PM)someone Wrote:  

(02-24-2024 01:28 PM)joaoribeiro92 Wrote:  I’m trying to use CRU to create a stretch res but on the standard resolution I can’t find my native resolution that is 2560x1440p I try to add it but the numbers appear in red so I can’t press ok to add it any help whit this ?

the horizontal resolution is limited to 2288; add a detailed resolution.

So it means that I can’t use CRU on 2560x1440 ?

Yes you can, but you need to add it as a detailed resolution like I said; the maximum possible resolution is 4095x4095 in that case.

I had a DisplayID 1.3 extension block and i edit that and change to 1800x1440 and it worked i don’t know if it’s ok like that or not

[someone]

(02-25-2024 01:18 AM)joaoribeiro92 Wrote:  

(02-24-2024 09:51 PM)someone Wrote:  

(02-24-2024 06:45 PM)joaoribeiro92 Wrote:  

(02-24-2024 06:33 PM)someone Wrote:  

(02-24-2024 01:28 PM)joaoribeiro92 Wrote:  I’m trying to use CRU to create a stretch res but on the standard resolution I can’t find my native resolution that is 2560x1440p I try to add it but the numbers appear in red so I can’t press ok to add it any help whit this ?

the horizontal resolution is limited to 2288; add a detailed resolution.

So it means that I can’t use CRU on 2560x1440 ?

Yes you can, but you need to add it as a detailed resolution like I said; the maximum possible resolution is 4095x4095 in that case.

I had a DisplayID 1.3 extension block and i edit that and change to 1800x1440 and it worked i don’t know if it’s ok like that or not

It's ok as a standard resolution as well because of its aspect ratio being 5:4 and 1800 being divisible by 8. The same is true if you add it as a detailed resolution, whether or not it's in extension blocks (regardless of the aspect ratio).

[joaoribeiro92]

(02-25-2024 04:07 AM)someone Wrote:  

(02-25-2024 01:18 AM)joaoribeiro92 Wrote:  

(02-24-2024 09:51 PM)someone Wrote:  

(02-24-2024 06:45 PM)joaoribeiro92 Wrote:  

(02-24-2024 06:33 PM)someone Wrote:  the horizontal resolution is limited to 2288; add a detailed resolution.

So it means that I can’t use CRU on 2560x1440 ?

Yes you can, but you need to add it as a detailed resolution like I said; the maximum possible resolution is 4095x4095 in that case.

I had a DisplayID 1.3 extension block and i edit that and change to 1800x1440 and it worked i don’t know if it’s ok like that or not

It's ok as a standard resolution as well because of its aspect ratio being 5:4 and 1800 being divisible by 8. The same is true if you add it as a detailed resolution, whether or not it's in extension blocks (regardless of the aspect ratio).

I just realise that I have a mirrored line on the middle of the screen so I presume that my monitor dosent accept that resolution any idea if I can solve that ?

[someone]

(02-25-2024 10:07 AM)joaoribeiro92 Wrote:  

(02-25-2024 04:07 AM)someone Wrote:  

(02-25-2024 01:18 AM)joaoribeiro92 Wrote:  

(02-24-2024 09:51 PM)someone Wrote:  

(02-24-2024 06:45 PM)joaoribeiro92 Wrote:  So it means that I can’t use CRU on 2560x1440 ?

Yes you can, but you need to add it as a detailed resolution like I said; the maximum possible resolution is 4095x4095 in that case.

I had a DisplayID 1.3 extension block and i edit that and change to 1800x1440 and it worked i don’t know if it’s ok like that or not

It's ok as a standard resolution as well because of its aspect ratio being 5:4 and 1800 being divisible by 8. The same is true if you add it as a detailed resolution, whether or not it's in extension blocks (regardless of the aspect ratio).

I just realise that I have a mirrored line on the middle of the screen so I presume that my monitor dosent accept that resolution any idea if I can solve that ?

enable gpu scaling (maintain aspect ratio/scale full screen/centre image).
this can be done in your gpu's control panel.