Custom Resolution Utility (CRU)

[ToastyX]

(07-07-2014 07:49 PM)MAx Wrote:  thanks for the answer i realized that my monitor doesnt have the proper driver installed but there are none : acer s240hl when i download the driver on the website it only contains an .ini data not more

Monitors don't need drivers. I'm talking about the graphics driver. What video card do you have?

[PrinceCharles]

Thank you so much for this....It worked perfectly!

Windows 8.1

Just bought a new Graphics card and two of the three screens wouldn't adjust to native resolution - I've been trying for days, but this did it perfectly.

Definitely deserve a donation - just say where!

Mark

[paulo1039]

How can I remove the warning "Not Optimum Mode" when I put in 1920x1080? My monitor is a S20A300N and its default resolution is 1600x900

[ToastyX]

(07-08-2014 06:54 PM)paulo1039 Wrote:  How can I remove the warning "Not Optimum Mode" when I put in 1920x1080? My monitor is a S20A300N and its default resolution is 1600x900

You can't. The monitor doesn't want you to use that resolution.

[MAx]

(07-08-2014 05:07 AM)ToastyX Wrote:  

(07-07-2014 07:49 PM)MAx Wrote:  thanks for the answer i realized that my monitor doesnt have the proper driver installed but there are none : acer s240hl when i download the driver on the website it only contains an .ini data not more

Monitors don't need drivers. I'm talking about the graphics driver. What video card do you have?

i have the radeon hd 6800

[ToastyX]

(07-12-2014 01:46 PM)MAx Wrote:  

(07-08-2014 05:07 AM)ToastyX Wrote:  

(07-07-2014 07:49 PM)MAx Wrote:  thanks for the answer i realized that my monitor doesnt have the proper driver installed but there are none : acer s240hl when i download the driver on the website it only contains an .ini data not more

Monitors don't need drivers. I'm talking about the graphics driver. What video card do you have?

i have the radeon hd 6800

Did you install the AMD Catalyst driver for the video card? Do you have Windows 8.1? What happens if you try the driver restarter?

[derschniffles]

So first of all, thanks for all the hard work and keeping up with your community!

Ive dug through a huge part of this thread to avoid asking repeat questions but ive had no such luck.

(Running SLI 760's on a Vizio 55")

So my tv accepts 120hz right through the nvidia control panel with automatic timings and works great. AWESOME!
But I would love you use CRU instead of using apps and whatnot to force my games to recognize the custom refreshrate/borderless fullscreen window.

But im also running through a Sony AVR and it kills my hdmi audio. Like you have mentioned before, ive have enabled the extension block and added the audio.dat but it only gives me 2 channel stereo....a perfect waste of 5.1 awesomeness. Is there any way around this?

Too clarify if need be, when I start my computer the receiver shows pcm 2/0 instead of the usual 3/2.1. Also in the sound config in windows under configure, it only shows 2 channel stereo instead of 5.1. Also, under supported formats it used to show everything (DD, DTS, DTS-HD/MA bla bla bla) and now it shows nothing.

Thank you for your time

[ToastyX]

(07-16-2014 12:29 AM)derschniffles Wrote:  But im also running through a Sony AVR and it kills my hdmi audio. Like you have mentioned before, ive have enabled the extension block and added the audio.dat but it only gives me 2 channel stereo....a perfect waste of 5.1 awesomeness. Is there any way around this?

Try this: https://www.monitortests.com/hdmi-bitstream.dat

[waldi2ger]

Hello,

sorry for my bad english but I use the Google translator.

Unfortunately, I can´t use the resolution 1920x1080 @ 110Hz and 1920x1200 @ 110Hz with the GPU scaling up in full screen mode. Do I use 96Hz I can let scale the two resolutions to full screen.

Monitor = qnix qx2710 evolution II
Graphic card = Gigabyte R9 280x
Driver = Catalyst Control Center 14.7

I once even made ​​a few tests. Here's what I've found out there.
With this setting at 110Hz, I can not use 1920x1080 resolution at 110Hz and full screen.
[Image: http://up.picr.de/18933254ms.jpg]
(Automatic - LCD standard)

In these settings it works.
[Image: http://up.picr.de/18933258ih.jpg]
(Manual)

With these settings, it also works.
[Image: http://up.picr.de/18933261ax.jpg]
(Automatic - LCD reduced)

I have now found out that not underclocks in the "Automatic LCD reduced" settings of the memory clock.

What can I do to 1920x1080 @ 110Hz to use with full screen and the graphics memory is clocked down now?

[ToastyX]

(07-16-2014 06:52 PM)waldi2ger Wrote:  What can I do to 1920x1080 @ 110Hz to use with full screen and the graphics memory is clocked down now?

Get an NVIDIA card. AMD cards have trouble scaling some resolutions at higher pixel clocks. I don't know if it's a hardware or driver limitation, but I don't have a way around that.