AMD/ATI Pixel Clock Patcher

[craftsman]

Why does no one answer? So the project is in a state of stagnation??

[ToastyX]

(05-18-2018 02:09 PM)craftsman Wrote:  Why does no one answer? So the project is in a state of stagnation??

You didn't mention your hardware or what you're trying to do. 1.4.6 still works with 18.4.1, so I don't know what could be causing your problem.

[craftsman]

Ok,
My hardware:
Motherboard: H61MU-E35 (B3)
CPU: Intel Celeron G1620 OEM
RAM: 4 GB
HDD: WD1003FBYX
Video: Saphire Radeon RX480 Nitro

My software: Windows 7 x64 Ultimate (or Windows 10 x64 Enterprise LTSB)

First, I installed the driver radeon-software-adrenalin-18.4.1-minimalsetup-180426_web.exe
Screen works perfectly!

Then I install the patch atikmdag-patcher-1.4.5 application (or atikmdag-patcher-1.4.6)
Patch is perfectly executed, without errors!

But after that the resolution of the screen is reduced to 640x480 and it is impossible to increasy it.
In addition, the screen in the settings acquires a new erroneous name: "Screen of the mobile PC".
Reboot of the system does not help.

Helps to me to solve the problem, please

[ToastyX]

(05-18-2018 11:18 PM)craftsman Wrote:  But after that the resolution of the screen is reduced to 640x480 and it is impossible to increasy it.
In addition, the screen in the settings acquires a new erroneous name: "Screen of the mobile PC".

What monitor? What cable? DVI? HDMI? Any adapters?

[craftsman]

This defect manifests itself on different monitors.
For example, Syncmaster 940T and Flatron E2750V-PN.
A DVI slot is used.
Cables are native to these monitors.
No any adapters are used.

[ToastyX]

(05-19-2018 01:03 PM)craftsman Wrote:  This defect manifests itself on different monitors.
For example, Syncmaster 940T and Flatron E2750V-PN.
A DVI slot is used.
Cables are native to these monitors.
No any adapters are used.

Does the device manager show any problems with the video card or monitor?

[craftsman]

No problem! "The device works normally"

[Iamtutut]

(05-18-2018 02:45 PM)ToastyX Wrote:  

(05-18-2018 02:09 PM)craftsman Wrote:  Why does no one answer? So the project is in a state of stagnation??

You didn't mention your hardware or what you're trying to do. 1.4.6 still works with 18.4.1, so I don't know what could be causing your problem.

Hello,

I've been using your patch up to 18.3.4 drivers, but it seems to be ineffective with the brand new Adrenalin Q2 driver of may 2018.
What I did (system is win 10 build 1803 + X470 mobo + Ryzen 2400G + 3X RX570 with bios mod):
- DDU 18.3.4
- Install Q2 driver
- Apply 1.4.6 patcher
- Restart system.

Vega 11 from Ryzen 2400G is properly setup, but all RX 570s show a code 43 error

May you please check if yout patcher still works with Adrenalin Q2 drivers please ?
https://www2.ati.com/drivers/Win10-64Bit...-May17.exe

Regards.

[genc74]

Hello everyone,

i have a Problem with Asus R9 390 Strix 8GB GD5 DC3OC. After install of AMD Drivers i have black screen and i think the programs crashes too.

i have try a lot of Drivers ist the same. I try low Resolution Option of Windows there Comes Little bit then the same. Everything doesnt work.

If there anyone have this same Issue and solve it can they help me please?

My System:

-Windows 10 Education 64x

- MSI B360-A Pro (MoBO)
- Intel i5 8400 (CPU)
- 4GB DDR4 2666 Crucial Ballastix LT (RAM)
- Asus R9 390 Strix DC3OC 8GB GD5 (GPU)
- ADATA S900 128 GB (SSD)

PS: - Samsung SyncMaster SA300 (FHD Monitor)

[keksik]

Hi there,

first, thank you for your work and second let me explain my trouble i have.
i have:
6x rx 570 asus rog strix 4gb
asus prime h270 plus
60gb ssd, 4gb ram and celeron cpu
monitor is philipis connected via old conector and using reduction to hdmi.

so in windows 10 build 1703 and adrenaline 18.4.1 driver, patcher 1.4.6 all worked like a charm. trouble started when i updated windows on 1803 April build. all starts to be not responding, like you want to move with mouse and all happened after 10seconds.. i wasnt able to set frequency via bat file from overdriveN tool it gave me BSOD. also i close it and waited like for 10minutes and responsivnes was not much better. i was not able to open amd settings window. VEEEEERYYYYY slow response for all clicks and movements.
so i tried to set pcie gen auto/gen 1 and gen 2 nothing worked. also have read in this forum to disable 4G decode. windows started again work properly fast, however only 4 cards was "green" in device manager remaining 4 were as like before atkmdag patch applied.
i tried to reinstall windows 10 1803 (fresh installation + full updates) twice also tried amd newest driver 18.5.1. till applying atikmdag patcher 1.4.6 all work properly (except my card have modified bios, so....), after i apply patcher, then slowness start to happen... i dont know where could be the problem, but i suspect kind of compatibility between 1803 w10 and patcher 1.4.6.

please can you advise/take a look on this problem?
thank you very much