Custom Resolution Utility (CRU)
|
03-10-2023, 07:53 AM
Post: #7271
|
|||
|
|||
RE: Custom Resolution Utility (CRU)
(03-09-2023 10:50 PM)ToastyX Wrote:(03-09-2023 04:37 PM)Parallellines Wrote: Including it still broke the resolutions. As I said, it happens with any edits whatsoever and I only used the Freesync range value as a quick example.It's not that simple. Every behavior in CRU is done for a reason. CRU was not originally meant to be a complete EDID editor, so certain values are always set a certain way; otherwise I would have to design a UI that allows users to edit fields that have no effect. I also have workarounds for certain driver bugs and invalid values so users don't have to worry about that stuff. I appreciate the explanation. Changing the number of detailed resolutions from 0 to 1 fixed the issue, so it's an AMD driver bug indeed. |
|||
03-10-2023, 10:14 AM
(Last edited: 03-10-2023, 10:19 AM by thezagreus)
Post: #7272
|
|||
|
|||
RE: Custom Resolution Utility (CRU)
Hello, i have RX 6700XT, my monitor successfully overclocking to 85 Hz on 1280x960. But I can not overclock it to 80 Hz on 1920x1080.
Previously, I had nvidia (gtx 1060) and I did it successfully (overclock 80hz on FHD). Now, I can't do it. Is this a AMD driver issue? My max results on FHD on rx6700xt - 71hz. (AMD Adrenalin does not allow you to create another profile. Error: display does not support) P.S: I connected my GTX 1060 with a DVI-D TO DVI-D cable. Now, i connected my RX 6700XT a HDMI to DVI-D. AMD DRIVER: 23.2.1 |
|||
03-10-2023, 03:28 PM
Post: #7273
|
|||
|
|||
RE: Custom Resolution Utility (CRU)
(03-09-2023 12:00 AM)ToastyX Wrote:(03-08-2023 09:40 PM)MightyEagle82 Wrote: I want to use the app in WinPE which does not have 32-bit subsystem. Could you build 64-bit version of the app?I can't make a 64-bit version until 2.x because the compiler and frameworks I used to create 1.x are too old. CRU would not have an effect in such an environment anyway. CRU needs a graphics driver that supports EDID overrides. It sounds strange for me because I use only one WinPE image (built from Windows 10 ADK without any drivers) on 2 laptop: one with FHD display and another with UHD display. On the first one native resolution is set after the boot, but on the second one - low (possible 800x600). Maybe it depends on UEFI of specific laptop. But I'm not an expert in this field. |
|||
03-10-2023, 05:16 PM
Post: #7274
|
|||
|
|||
RE: Custom Resolution Utility (CRU) | |||
03-12-2023, 07:37 AM
(Last edited: 03-12-2023, 10:20 AM by ahantos)
Post: #7275
|
|||
|
|||
RE: Custom Resolution Utility (CRU)
Hey Toasty,
I have a pretty serious problem that I've been trying to figure out for the past few days, and I'm really hoping you can help. Background: ASUS G533ZW (3070ti) laptop with a 240hz refresh rate display in it. Windows update dropped a few days agi, and suddenly, after one year of everything being fine, my refresh rate options completely disappeared. Can only see 60hz in Windows, and in NVIDIA as well. If I try to force a higher hz in NVIDIA custom resolutions, it goes up to 160, and after that, the monitor goes black when I try it. I tried cleaning the system of drivers(ddu) and reinstalling them, as well as performing a clean install (format+reinstall windows), but the issue still persists. I found your CRU tool and hoped to somehow be able to force the system to run at 240hz. I can confirm that I have the right values in the displayblock that I have (2560x1440 @ 240hz), however, I can't set a custom detailed resolution to anything above 162hz, as the number turns red. I tried creating custom extension blocks, tried importing one as the sticky post says, but nothing works, as the values are there and actually what I'd want them to be, yet I still can't set the hz in the resolution that high. The detailed resolution tab states as well: Range limits 60-240hz, 389-389khz, 1070mhz. Enclosed I'm attaching the EDID file. If you have any idea of what could be wrong, I'd really appreciate the help! |
|||
03-12-2023, 09:37 AM
Post: #7276
|
|||
|
|||
RE: Custom Resolution Utility (CRU)
Hi. Could anyone help?
I have a Lenovo L27q-10 27" monitor (default 60Hz) and an Asus K53SV laptop with Intel HD Graphics 3000. When I connect the monitor via HDMI, I get a strange resolution of 1920x1200 by default... When I connected this monitor to my friend's laptop (Dell G3) this laptop immediately detected the native resolution of 2560x1440. I tried using the CRU to set 2560x1440 resolution (60Hz at first) on my laptop, but I get a message about returning to 2560x1440@60Hz(eee?) or the message "Power Saving Mode". The only thing I managed to do was to set it to 2560x1440@55Hz or 54Hz but the monitor sometimes disappears for a second. Currently I am forced to use 1920x1080@76Hz with Automatic PC setting (using EDID.exe) - maximum for this resolution. Later I also set 76Hz for my laptop's matrix (using the second EDID), so now I have 76Hz on both the monitor (HDMI) and the laptop. Is there any possibility to set the resolution to 1440p on this monitor connected to my laptop? I will be grateful for any help! |
|||
03-12-2023, 12:55 PM
Post: #7277
|
|||
|
|||
RE: Custom Resolution Utility (CRU)
As of today CRU still does not work with 7900XT latest driver. AMD still have not unlocked their driver for custom EDID. Sucks.
|
|||
03-12-2023, 01:51 PM
Post: #7278
|
|||
|
|||
RE: Custom Resolution Utility (CRU) | |||
03-13-2023, 01:19 PM
Post: #7279
|
|||
|
|||
RE: Custom Resolution Utility (CRU)
(03-10-2023 10:14 AM)thezagreus Wrote: Hello, i have RX 6700XT, my monitor successfully overclocking to 85 Hz on 1280x960. But I can not overclock it to 80 Hz on 1920x1080.No, this is not a driver issue. You need to read the part about pixel clock limits. (03-12-2023 01:51 PM)thezagreus Wrote: SAME RX 6000That has nothing to do with your issue. |
|||
03-13-2023, 01:19 PM
Post: #7280
|
|||
|
|||
RE: Custom Resolution Utility (CRU) | |||
« Next Oldest | Next Newest »
|
User(s) browsing this thread: 116 Guest(s)