Custom Resolution Utility (CRU)
|
04-14-2015, 11:43 PM
Post: #1321
|
|||
|
|||
RE: Custom Resolution Utility (CRU)
(04-12-2015 09:31 PM)ksb Wrote: Yes, it's listed and I can even choose and apply and then Windows thinks it's switched, while actually nothing changed in output(I reopened that window in screenshot). Only - this resolution magically appears in NVIDIA CP. Notice that in Windows CP and also in this NVIDIA CP list resolution is listed as 25Hz(frame rate).I tried playing with an old CRT, but I haven't had much luck. The driver doesn't seem to be handling interlaced resolutions properly even though the hardware is capable. It ignores interlaced resolutions in the EDID, and it won't save custom resolutions properly. |
|||
04-15-2015, 12:45 AM
Post: #1322
|
|||
|
|||
RE: Custom Resolution Utility (CRU)
(04-13-2015 02:43 PM)zaczac Wrote: Looks like Intel is finally going to add EDID overrides, will this help with achieving higher refresh rates on Intel only / switchable graphic systems?I won't know until they do, but I doubt they will implement EDID overrides any time soon. The recent posts are about the open source Linux driver. EDID overrides would help with custom resolutions, but the driver might need to be patched to get higher refresh rates with DVI. |
|||
04-15-2015, 12:58 AM
Post: #1323
|
|||
|
|||
RE: Custom Resolution Utility (CRU)
(04-13-2015 07:47 PM)kammi23 Wrote: I have my laptop running to a Samsung 60hz monitor via HDMI. I currently have it overclocked in the Nvidia control panel to 75hz (fraps shows 75 fps when vsynced in game). My question is am I actually getting the benefit of the extra 15hz because i have read a few places that HDMI limits your refresh rate or something?? any help would be super appreciated thxPorts are limited by pixel clock, not refresh rate. HDMI is definitely capable of 75 Hz. You should be able to see the difference just by moving the mouse cursor with a 1000 Hz mouse. Some monitors will only display 60 FPS though. Use this to make sure the monitor is not skipping frames: http://testufo.com/#test=frameskipping |
|||
04-15-2015, 08:11 PM
Post: #1324
|
|||
|
|||
RE: Custom Resolution Utility (CRU)
(04-14-2015 08:44 PM)ToastyX Wrote:(04-12-2015 07:10 PM)gjaky Wrote: I am planning to build a new HTPC for my CRT projector with the lowest possible power consumption, so far the best candidate would be the AMD Kabini APU (Athlon 5350 or Semprom 3850) these have an integrated Radeon R3 graphics core. For the CRT projector I use a specially breed 1080i-96Hz timing that I was able to set on all of my previous systems, now I am curious if these new integrated AMD cores fare well with the CRU and can do custom interlaced resolution just as well as their predecessors? Any information is welcome!I have no way of knowing without trying it, but EDID overrides should work with the AMD APUs, and custom interlaced resolutions are usually possible at 1080i because it is a common TV resolution. Thanks for the input, guess I will jump on it then and will the first to report. ![]() |
|||
04-18-2015, 04:19 PM
(Last edited: 04-18-2015, 04:27 PM by fabiobad)
Post: #1325
|
|||
|
|||
RE: Custom Resolution Utility (CRU)
Hello ToastyX, i hope you can help me because i have an huge issue with 59hz resolutions.
I have an ATI 280X and when i play in fullscreen @1280x720 (HD) or @1920x1080 (FullHD), almost all games reads those resolutions at 59HZ, so if i use the v-sync i have a lot of stutter. If i chose other resolutions, they are all at 60HZ, expect the HD and FullHD mentioned before. With certain games i resolved playing in windowed mode, but it cost some fps, in other case i can force v-sync with Radeon Pro, but it didn't work with all games. In some cases (like GTAV) the game rendering @59HZ (in HD and Full HD res.) even in windowed mode. If i play GTAV in all other resolution i don't have problems, but only with those two. My monitor is an EIZO FORIS FS2333 (1080p @60HZ), so i'm only interested in this resolution, i cited the "HD" one for clarity. I tryed to use CRU, but the program read that i have a 1080p-60HZ resolution, and even if i create another one with those setting, the various games still lock me at 59HZ. Can you tell me how fix this issue? EDIT: I forgot to tell you that I use Windows 8.1. Thank you very much ![]() p.s. i've tried those games with an old Nvidia 560 ti, and there isn't any of those "59hz" issues, so i think thats an ATI problem, but i don't know how fix it :/ |
|||
04-18-2015, 04:37 PM
Post: #1326
|
|||
|
|||
RE: Custom Resolution Utility (CRU)
(04-18-2015 04:19 PM)fabiobad Wrote: Hello ToastyX, i hope you can help me because i have an huge issue with 59hz resolutions.59 Hz shouldn't cause stuttering. Vsync is supposed to use the actual refresh rate. The monitor might have TV resolutions defined in the extension block. Try setting "Custom extension block" to disable them. NVIDIA does the same thing with TV resolutions, so I don't know why you're only having the problem with AMD. |
|||
04-18-2015, 04:58 PM
(Last edited: 04-18-2015, 05:05 PM by fabiobad)
Post: #1327
|
|||
|
|||
RE: Custom Resolution Utility (CRU)
(04-18-2015 04:37 PM)ToastyX Wrote:(04-18-2015 04:19 PM)fabiobad Wrote: Hello ToastyX, i hope you can help me because i have an huge issue with 59hz resolutions.59 Hz shouldn't cause stuttering. Vsync is supposed to use the actual refresh rate. I dont know if "stutter" is the right expression, but you can see clearly the the image go out of sync when you rotate the camera, it go fluid for a bit and then you have a spike, and go on... Regarding that setting, do you mean like that? [Image: http://oi62.tinypic.com/28ssqc4.jpg] I tried but no luck, still have the 59HZ issue :/ I double clicked the "restart64.exe" when i exit the program, i'm doing right? |
|||
04-18-2015, 11:45 PM
Post: #1328
|
|||
|
|||
RE: Custom Resolution Utility (CRU)
(04-18-2015 04:58 PM)fabiobad Wrote: I dont know if "stutter" is the right expression, but you can see clearly the the image go out of sync when you rotate the camera, it go fluid for a bit and then you have a spike, and go on...I meant with the custom extension block enabled so it can override the default, but disabling has the same effect with AMD. It doesn't matter anyway because the driver seems to be hard-coded to add 1920x1080, 1280x720, 720x480, and 640x480 at 59 and 60 Hz even if they are not defined. I could have sworn it was possible to override this before, but maybe not with AMD at those resolutions. The driver would have to be modified to remove those resolutions. I might be able to integrate that into a future version of the pixel clock patch if I can find where they're being added. NVIDIA also adds 59 Hz if 60 Hz exists at any resolution. I still don't understand why that would cause stuttering or sync issues unless the game has a frame rate cap. The point of vsync is to synchronize with the actual refresh rate. One option is to change 1920x1080 to something like 1920x1078. That will get rid of 1920x1080 @ 59 and 60 Hz. Leave the totals at 2200x1125 to keep it at exactly 60 Hz. Use the "Enlarged" (aspect scaling) or "Normal" (1:1 mapping) screen size option in your monitor to prevent the monitor from scaling the resolution. |
|||
04-20-2015, 03:00 PM
Post: #1329
|
|||
|
|||
RE: Custom Resolution Utility (CRU)
i have ATI Radeon HD 3400 Series. i am wondering is it possible to set my resolution to 960 540 for 60 fps (the monitor is 1960 1080 so 1/4 is 960 540) i added the setting but it just is grey and doesnt show up in resolution in windows. if this dont work is there other way to do this? it is to play game on steam fullscreen.
|
|||
04-20-2015, 04:17 PM
Post: #1330
|
|||
|
|||
RE: Custom Resolution Utility (CRU)
(04-20-2015 03:00 PM)username Wrote: i have ATI Radeon HD 3400 Series. i am wondering is it possible to set my resolution to 960 540 for 60 fps (the monitor is 1960 1080 so 1/4 is 960 540) i added the setting but it just is grey and doesnt show up in resolution in windows. if this dont work is there other way to do this? it is to play game on steam fullscreen.Add it as a detailed resolution. AMD/ATI does not support standard resolutions that are not in the drop-down list. |
|||
« Next Oldest | Next Newest »
|
User(s) browsing this thread: 85 Guest(s)