Custom Resolution Utility (CRU)

[Altberta]

(11-30-2016 10:47 PM)ToastyX Wrote:  That's not an EDID problem. 2560x1440 @ 100 Hz at 8 bpc requires DisplayPort 1.2. Either your monitor is not reporting itself correctly, or it doesn't support DisplayPort 1.2 speeds.

If so, can I recognize DP version?

(11-30-2016 10:47 PM)ToastyX Wrote:  That's a monitor problem. Either it's not reporting the correct timing parameters, or there's a firmware bug. You can try changing the timing parameters to see if that helps, but I don't know what will work with that monitor.

So, how do I modify the timing parameter values?

[selnomeria]

PLEASE everyone... This topic very very heavy.. I cant find the desired answer..
please tell me, how to do that with Intel HD (4400).

p.s. Post author, please, make one mini-website for this tool, or open a page on this domain, where will be:

FAQ | DOWNLOAD LINKS | Reviews | about ...etc...

so we wont look thought 300 pages..

[ToastyX]

(12-01-2016 12:21 AM)PooperJackson Wrote:  Are there specific situations in which this is needed and others not? Because I am using HDMI, added the resolution with none of the blocks and I'm getting audio over hdmi, including bitstreaming.

HDMI support is always required for audio to work. I don't see how it would work without it. Show me what you did. Export a file and post it here.

[ToastyX]

(12-01-2016 12:23 AM)bizuka Wrote:  toasty, so can you help me create a custom resolution 1280:1024 on the CRU?
my doubts are:
Timings: should i select an automatic timer? if so wich one? or should i go for the manual? if so what values should i introduce on: front and back porch, sync with blanking and total , horizontal frequency pixel clock and interlaced?

Just use whatever works. For lower resolutions, "LCD standard" works fine in most cases. It will calculate everything for you. Don't choose interlaced.

[ToastyX]

(12-01-2016 12:34 AM)yukisyaoran Wrote:  Hey Toasty,
It is possible if I buy an external 60Hz/114Hz and plug it into the HDMI port of my laptop to experience higher refresh rate?
Thank you.

60 Hz will work with HDMI with an external monitor. 120/144 Hz monitors require dual-link DVI or DisplayPort.

[ToastyX]

(12-01-2016 06:31 AM)havok6 Wrote:  so i cant enable freesynce with this monitor? even with the block?

I doubt it will work. That block is for setting the HDMI FreeSync range. You'll need a video card and monitor that supports FreeSync with HDMI.

[ToastyX]

(12-01-2016 07:29 AM)Altberta Wrote:  If so, can I recognize DP version?

I don't have a way to check the DisplayPort version. It should support DisplayPort 1.2 if it supports FreeSync, but it might not be negotiating the correct speed. I can't do anything about that.

(12-01-2016 07:29 AM)Altberta Wrote:  So, how do I modify the timing parameter values?

Use the timing options in the detailed resolution dialog, or change the numbers manually and see if anything changes.

[ToastyX]

(12-01-2016 09:34 AM)selnomeria Wrote:  PLEASE everyone... This topic very very heavy.. I cant find the desired answer..
please tell me, how to do that with Intel HD (4400).

p.s. Post author, please, make one mini-website for this tool, or open a page on this domain, where will be:

FAQ | DOWNLOAD LINKS | Reviews | about ...etc...

so we wont look thought 300 pages..

That's what the first post is for, and the front page links directly to it. I don't expect people to look through 300 pages.

[yukisyaoran]

(12-01-2016 10:20 AM)ToastyX Wrote:  

(12-01-2016 12:34 AM)yukisyaoran Wrote:  Hey Toasty,
It is possible if I buy an external 60Hz/114Hz and plug it into the HDMI port of my laptop to experience higher refresh rate?
Thank you.

60 Hz will work with HDMI with an external monitor. 120/144 Hz monitors require dual-link DVI or DisplayPort.

thank you for your information.
I looked up what you said and this page states exactly the same and in addition to that I can use HDMI 3.0 or higher.
http://www.144hzmonitors.com/knowledge-b...do-i-need/
With my lack of knowledge I don't even know if my Lenovo Y50 can plug any of those 3 in?
edit: it has an hdmi port thats all I assure.

[Altberta]

(12-01-2016 10:27 AM)ToastyX Wrote:  I don't have a way to check the DisplayPort version. It should support DisplayPort 1.2 if it supports FreeSync, but it might not be negotiating the correct speed. I can't do anything about that.

I contacted the manufacturer about this, but have not heard it yet. They also say that they are errors in the graphics card properties, but I think they do not know much about this issue.

(12-01-2016 10:27 AM)ToastyX Wrote:  Use the timing options in the detailed resolution dialog, or change the numbers manually and see if anything changes.

I tried to modify the value in the option but did not get a satisfactory result. I had to fix the resolution itself. (1440 -> 1436) However, I did not do that because this is not considered a complete solution.