Custom Resolution Utility (CRU)

[benjamimgois]

(07-23-2017 09:42 PM)ToastyX Wrote:  

(07-23-2017 09:10 PM)benjamimgois Wrote:  It´s a LG UH6500, but as i say. It used to work some months ago. Is there a chance that some HDMI ports on the TV are 2.0 and other don´t ? Some time ago a made some conexion changes.

That's possible on some models, but the manual for this model doesn't indicate this. You might have to turn on the "HDMI ULTRA HD Deep Color" option in the TV's settings to enable HDMI 2.0. Then run reset-all.exe and restart.exe to clear out the old settings. If HDMI 2.0 is enabled, CRU should show "(HDMI 2.0)" in the extension block list. Then you should be able to add 3200x1800 @ 60 Hz.

That´s exactly it ! You solve the problem... Now i saw that after upgrade the tv firmware it wipes out the old configuration and "ULTRA HD DEEP COLOR" were disable. I saw lot´s of people in the digital foundry comments with similar problems, i´ll pass this information on and point to this forum. Thanks for the help ToastyX you´re the best !

[crucialkieran]

Hi Guys

I have an issue, I was using CRU to run multiple LG Ultrawide displays (1080 x 2560), one is connected via DVI and the other HDMI.
The HMDI Connected one has always worked in full res through windows display settings, but the other always tried to run 1080 x 1920 streched across the monitor.
Ive been using CRU for months to run both in 1080 x 2560, but since the windows update which I installed friday, the second monitor (DVI) has gone back to displaying in streched 1080 x 1920 and i cant seem to get CRU to over ride this?

Any Ideas

Cheers

Kieran

[Black Mario]

Hey Hey,
I have created a file this was created with CRU now I get only the boot process to see afterwards no signal the only thing I can do ist 2 boot via USB 2 fix it.
Dry Bad englisch Working on Translator.
My Monitor is AOC AGON AG271QG or a Dell U2515H, MSI GTX 1080 FE.

[itagouki]

Hi, I'm using CRU to play in 1300p through AMD VSR, it's working great.
My issue any custom resolution above 1300p isn't listed by windows or games. Though VSR makes 1440p and 1800p available.

My card is r9 290.

[ToastyX]

(07-24-2017 09:23 PM)itagouki Wrote:  Hi, I'm using CRU to play in 1300p through AMD VSR, it's working great.
My issue any custom resolution above 1300p isn't listed by windows or games. Though VSR makes 1440p and 1800p available.

My card is r9 290.

CRU does not create VSR resolutions. It creates resolutions that are sent to the monitor, so the pixel clock will be limited by the connection. VSR adds GPU-scaled resolutions based on the native resolution, which is the first detailed resolution.

[ToastyX]

(07-24-2017 01:01 PM)Black Mario Wrote:  Hey Hey,
I have created a file this was created with CRU now I get only the boot process to see afterwards no signal the only thing I can do ist 2 boot via USB 2 fix it.
Dry Bad englisch Working on Translator.
My Monitor is AOC AGON AG271QG or a Dell U2515H, MSI GTX 1080 FE.

I don't know what you're asking. Your post has no question, and it has no information on what you're trying to do.

[ToastyX]

(07-24-2017 10:50 AM)crucialkieran Wrote:  I have an issue, I was using CRU to run multiple LG Ultrawide displays (1080 x 2560), one is connected via DVI and the other HDMI.
The HMDI Connected one has always worked in full res through windows display settings, but the other always tried to run 1080 x 1920 streched across the monitor.
Ive been using CRU for months to run both in 1080 x 2560, but since the windows update which I installed friday, the second monitor (DVI) has gone back to displaying in streched 1080 x 1920 and i cant seem to get CRU to over ride this?

What video card do you have? What model are these monitors? You shouldn't have to add 2560x1080. It should already be there if the monitor supports it with DVI.

[Black Mario]

I don't know what you're asking. Your post has no question, and it has no information on what you're trying to do.

Format my System and installed a new OS, Solved.
I habe created Manually a new information with CRU, After this one I reboot my System but no Signal on my screen.
What I want 2 know is how 2 change the registry setup, over the CMD.
Without boot windows, boot via USB.

[ToastyX]

(07-25-2017 01:23 AM)Black Mario Wrote:  Format my System and installed a new OS, Solved.
I habe created Manually a new information with CRU, After this one I reboot my System but no Signal on my screen.
What I want 2 know is how 2 change the registry setup, over the CMD.
Without boot windows, boot via USB.

You haven't told me what you tried. Were you not able to boot into safe mode and run reset-all.exe?

[crucialkieran]

(07-25-2017 12:14 AM)ToastyX Wrote:  

(07-24-2017 10:50 AM)crucialkieran Wrote:  I have an issue, I was using CRU to run multiple LG Ultrawide displays (1080 x 2560), one is connected via DVI and the other HDMI.
The HMDI Connected one has always worked in full res through windows display settings, but the other always tried to run 1080 x 1920 streched across the monitor.
Ive been using CRU for months to run both in 1080 x 2560, but since the windows update which I installed friday, the second monitor (DVI) has gone back to displaying in streched 1080 x 1920 and i cant seem to get CRU to over ride this?

What video card do you have? What model are these monitors? You shouldn't have to add 2560x1080. It should already be there if the monitor supports it with DVI.

Monitor 1 that runs through the HDMI has always had 2560 x 1080 available as a resolution in the windows settings, the second on that used the DVI has never had that option in the widnows settings, which is why I downloaded CRU as a fix. It has worked for months so the video card/cable definetley supports it, it is only since the most recent windows update it has stopped wroking.

My video card is a Radeon HD 6570, I have attached two screenshots as reference, showing each screen in windows settings and CRU.

Any advice would be appreciated.

Thanks

Kieran