Custom Resolution Utility (CRU)

[ToastyX]

(04-12-2020 05:45 PM)ExtensionJellyfish8 Wrote:  I tried a clean driver install but now I have a new problem ontop of the other issue. No matter which timings I chose for the monitor, the gpu will always max the memory clock when watching videos in fulllscreen. Could it be the driver at fault as I used an older driver now?

I don't see why that's a problem.

[ExtensionJellyfish8]

(04-12-2020 08:35 PM)ToastyX Wrote:  

(04-12-2020 05:45 PM)ExtensionJellyfish8 Wrote:  I tried a clean driver install but now I have a new problem ontop of the other issue. No matter which timings I chose for the monitor, the gpu will always max the memory clock when watching videos in fulllscreen. Could it be the driver at fault as I used an older driver now?

I don't see why that's a problem.

Hi again. I’ve tried now with an clean install of windows with the latest recommended drivers from ams now the timings work as they did before but they still won’t stick until I use the restart.exe. Is this a solvable issue? I mean it’s only a minor inconvenience but still an inconvenience I’d rather not have to do. Thank you.

[fueyue]

help! i just apply a wrong resolution to surface pro 4, and monitor shows nothing since reboot. safe mode works but which config files should I restore/delete exactly? thx alot

[ToastyX]

(04-13-2020 05:53 AM)fueyue Wrote:  help! i just apply a wrong resolution to surface pro 4, and monitor shows nothing since reboot. safe mode works but which config files should I restore/delete exactly? thx alot

Run reset-all.exe.

[ToastyX]

(04-13-2020 12:10 AM)ExtensionJellyfish8 Wrote:  Hi again. I’ve tried now with an clean install of windows with the latest recommended drivers from ams now the timings work as they did before but they still won’t stick until I use the restart.exe. Is this a solvable issue? I mean it’s only a minor inconvenience but still an inconvenience I’d rather not have to do. Thank you.

I don't know how to solve an issue that's not supposed to be happening in the first place.

[Joey22]

(04-12-2020 01:16 PM)ToastyX Wrote:  

(04-12-2020 10:57 AM)Joey22 Wrote:  I got an issue using this excelent program. I am using acer xr341ck monitor with 3440x1440 resolution. Problem is that i cannot set 2560x1440 resolution in Starcraft 2. BUT if I set this resolution in CRU for 60 and 75hz, the option to set 2560x1440 magicaly appears and even works without problems. BUT if I do so, freesync appears in drivers as "Not supported" and obviously is not working. Is there any fix for this? Graphics vega 64

Try enabling GPU scaling.

Didn´t solve a problem, neither i tried enabling it while CRU disabled (2560x1440 wont appear in sc2) nor enabling, while cru enabled. Resolutions appears but freesync is disabled. I see you have many questions in here. I wanted to thank you for great work at least. Thanks buddy

[lapomonitor]

Hi there, I have an old Lenovo laptop with Windows 10 and in my Intel control panel in advanced mode, the largest resolution is 1366 x 7689 32bit 60Hz. I opened your utility and added a standard 1920 x 1080 60Hz resolution. I clicked OK and executed restart64.exe. So far so good but then I'm lost. If I re-open the Intel control panel I don't see the new resolution. If I go into my graphics card properties on the Monitor tab, I just see a drop-down to select the refresh rate. My adapter settings has an Intel tab that leads me back to Intel's control panel. My "display resolution" settings in Windows also do not give me the new resolution.

Thanks for any help!

[ToastyX]

(04-13-2020 03:12 PM)lapomonitor Wrote:  Hi there, I have an old Lenovo laptop with Windows 10 and in my Intel control panel in advanced mode, the largest resolution is 1366 x 7689 32bit 60Hz. I opened your utility and added a standard 1920 x 1080 60Hz resolution. I clicked OK and executed restart64.exe. So far so good but then I'm lost. If I re-open the Intel control panel I don't see the new resolution. If I go into my graphics card properties on the Monitor tab, I just see a drop-down to select the refresh rate. My adapter settings has an Intel tab that leads me back to Intel's control panel. My "display resolution" settings in Windows also do not give me the new resolution.

You can't add a higher resolution to a laptop.

[ryant704]

Hello,

If anybody is able to help me, my monitor would sit with a signal detected by windows and nvidia control panel but not allowed to enable the screen.

The monitor is 2560x1440 by default, I'm running a DP adapter to the DVI-D monitor. Before I was not able to get a picture or the screen to be actively on.

Using CRU, I've managed to override the EDID but the screen is just black with some backlight with the monitor on. I don't what settings I should try and turn on/off. Any help would be apprecitated thank you!

[ToastyX]

(04-13-2020 08:06 PM)ryant704 Wrote:  The monitor is 2560x1440 by default, I'm running a DP adapter to the DVI-D monitor. Before I was not able to get a picture or the screen to be actively on.

You need a dual-link DVI adapter, the kind with USB for power, like this one: https://www.amazon.com/dp/B07T16LLB8/?tag=mtests-20#ad