acer g235h questions

[turu]

Hi
1st question:
i've got aceer g235h monitor connected via DVI, and maximum refresh rate (standard) is 75hz, when i create custom resolution via nvidia control panel (create custmor resolution) max refresh rate i've got at 1024x768 is 76hz.. you're kidding me?

Is maybe a option to do 80hz++ or minimum 80hz with other programs, timings, or other tricks?

second question:
when i open the service/factory menu i've got option with "spread" name.

What is that "spread" option? I can choose it from 0 to 15, spread 0-15 and

EDID WP on/off

Can you tell me?

And third question:

Why when i do printscreen (desktop screenshot or whatever)

and i put ctrl + v (paste) to paint, i've got image like 2 desktops??

http://i41.tinypic.com/25aqjba.png <---- screen.


I need fuckin help, waiting for response with dickinhand (jokeD)

But help me fast as you can, please

Thanks.

[ToastyX]

Most 1920x1080 monitors will not accept more than 70-77 Hz. You might need to use this patch to get 1920x1080 @ 75 Hz with DVI: https://www.monitortests.com/forum/Threa...ck-Patcher

There's usually no need to mess with the factory menu. I don't know what the spread option is. EDID WP is EDID write protection. That should be left on unless you need to flash the EDID.

I don't know why the screen shot captures a second screen. That's really weird.

[turu]

(01-12-2014 05:50 PM)ToastyX Wrote:  Most 1920x1080 monitors will not accept more than 70-77 Hz. You might need to use this patch to get 1920x1080 @ 75 Hz with DVI: https://www.monitortests.com/forum/Threa...ck-Patcher

There's usually no need to mess with the factory menu. I don't know what the spread option is. EDID WP is EDID write protection. That should be left on unless you need to flash the EDID.

I don't know why the screen shot captures a second screen. That's really weird.

I use this patch and still can't get 75hz at 1920x1080... :/

[ToastyX]

What happens when you try to set 75 Hz? CRU has an "LCD reduced" timing option that might help. NVIDIA doesn't have that option, but you can use the same values with the NVIDIA control panel.

[turu]

When i try to set 75hz @ 1920x1080, monitor is black with "INPUT NOT SUPPORTED" text. In nvidia i haven't got "LCD Reduced" but i try all timings in nvidia and doesn't help :/

[turu]

Ok nvm, i copy the options from lcd reduced from cru to nvidia cp and i've got 75hz at 1920x1080

There is a any option to get 77hz + at 640x480 / 1024x768 ? For gaming ;/

[ToastyX]

"LCD standard" (CRU) or "CVT reduced blank" (NVIDIA) should work for 75 Hz at lower resolutions.

[turu]

ToastyX, i've still got this question to you. I can't found it on google and anywhere, you must help me, answer this please dude

What is this "SPREAD" option in factory menu of my monitor. I can choose from 0 to 15 for SPREAD..

This question cann't gave me sleep

here you've got "screenshot" of this.
http://pokazywarka.pl/af9c4l/ <--- [Image: http://pokazywarka.pl/af9c4l/]

PLEASE HELP

[ToastyX]

It might be spread spectrum: http://en.wikipedia.org/wiki/Spread_spectrum

You shouldn't need to change anything in the service menu. It will not help you get higher refresh rates.

[turu]

(05-17-2014 11:04 AM)ToastyX Wrote:  It might be spread spectrum: http://en.wikipedia.org/wiki/Spread_spectrum

You shouldn't need to change anything in the service menu. It will not help you get higher refresh rates.

Okey, thanks for reply then. But as you see here http://pokazywarka.pl/af9c4l/

I've got "audio" option too Its default "off" but i enabled this to "on". How the **** in service menu i've got AUDIO option without speakers in monitor?