Custom Resolution Utility (CRU)

[ToastyX]

(10-24-2020 10:04 AM)slobo2712 Wrote:  Thank you for answer,seems that drivers doesnt support 420 at 60hz but 30hz does as you can see on picture 3,Im not able to add 3840x2160 60hz no matter what..Just dont know why 2k60p can be added by same way.Confused...

2560x1440 @ 60 Hz is still under 300 MHz pixel clock, so that doesn't need 4:2:0.

[ToastyX]

(10-24-2020 03:19 AM)LLopesx Wrote:  Ok, thankx for teaching me some of your knowledge, and just one other thing, do you know something about the screen sometimes blacks out for 2-3 seconds than goes back to normal. It's really random i dont know how to reproduce this, and in the screen doesn't show any "connection loss" message, it's like when you change the resolution.

Does that only happen with FreeSync on?

[slobo2712]

(10-24-2020 02:46 PM)ToastyX Wrote:  

(10-24-2020 10:04 AM)slobo2712 Wrote:  Thank you for answer,seems that drivers doesnt support 420 at 60hz but 30hz does as you can see on picture 3,Im not able to add 3840x2160 60hz no matter what..Just dont know why 2k60p can be added by same way.Confused...

2560x1440 @ 60 Hz is still under 300 MHz pixel clock, so that doesn't need 4:2:0.

Ok,so there is no way..except to buy graphic card.Btw which is better 4k60hz or 1080p120hz?

[LLopesx]

(10-24-2020 02:47 PM)ToastyX Wrote:  

(10-24-2020 03:19 AM)LLopesx Wrote:  Ok, thankx for teaching me some of your knowledge, and just one other thing, do you know something about the screen sometimes blacks out for 2-3 seconds than goes back to normal. It's really random i dont know how to reproduce this, and in the screen doesn't show any "connection loss" message, it's like when you change the resolution.

Does that only happen with FreeSync on?

No

[ToastyX]

(10-24-2020 04:29 PM)LLopesx Wrote:  No

Then it sounds like a signal quality issue, maybe a bad cable.

[ToastyX]

(10-24-2020 03:20 PM)slobo2712 Wrote:  Ok,so there is no way..except to buy graphic card.Btw which is better 4k60hz or 1080p120hz?

Better for what?

[krom_lg]

(10-23-2020 11:54 PM)ToastyX Wrote:  

(10-23-2020 02:32 PM)krom_lg Wrote:  

(10-23-2020 12:44 AM)krom_lg Wrote:  I need help to change EDID on my monitor with this program, for me changes I made dosent take effect after using restart.exe. I have Samsung C27HG70 connected via DisplayPort. I want change free-sync range and ID of the monitor. Can someone help me?

Can someone answer to my question?

What exactly did you change?

I change the ID of tne monitor in Edit menu next to monitor name, then use restart.exe. My goal is to use generic CRT 3d mode of nvidia 3d vision. Thanks

[ToastyX]

(10-24-2020 09:18 PM)krom_lg Wrote:  I change the ID of tne monitor in Edit menu next to monitor name, then use restart.exe. My goal is to use generic CRT 3d mode of nvidia 3d vision. Thanks

3D Vision doesn't exist anymore.

[k3mist]

(10-19-2020 02:23 AM)ToastyX Wrote:  

(10-18-2020 10:45 PM)k3mist Wrote:  Is it even possible to prevent the monitor from being recognized that is supports HDR? If so what entries would I need to remove or modify?

HDMI or DisplayPort?

Hey Toasty, its DisplayPort

[krom_lg]

(10-24-2020 10:56 PM)ToastyX Wrote:  

(10-24-2020 09:18 PM)krom_lg Wrote:  I change the ID of tne monitor in Edit menu next to monitor name, then use restart.exe. My goal is to use generic CRT 3d mode of nvidia 3d vision. Thanks

3D Vision doesn't exist anymore.

I know, but
http://helixmod.blogspot.com/2017/05/3d-...nager.html